0.96 inch capacitive touch screen — A 0.96 inch OLED fitted with a custom projected capacitive touch panel. The OLED is driven over SPI, I2C or an 8-bit parallel bus while the touch controller reports over I2C. P+G construction keeps the stack thin enough for wearable and handheld devices.
Specifications
| Display | 0.96 inch OLED |
|---|
| Resolution | 96 x 64 |
|---|
| OLED interface | SPI / I2C / 8-bit parallel |
|---|
| Touch interface | I2C |
|---|
| Touch points | 1 point + gesture |
|---|
| CTP structure | P+G |
|---|
| Emitting colour | white / blue / yellow-blue dual colour |
|---|
See the full mechanical drawing and pinout on the 0.96 inch OLED with CTP/PCT page.
Compare with nearby sizes
| Size | Resolution | Interface | Touch points |
|---|
| 0.96 inch | 96 x 64 | SPI / I2C + I2C touch | 1 + gesture |
| 2.4 inch | 240 x 320 | I2C touch | 5 |
FAQ
What is the resolution of the 0.96 inch OLED touch module?
96 x 64 pixels. It is a 0.96 inch OLED with a custom projected capacitive touch panel in P+G construction.
Which interfaces does the 0.96 inch OLED touch display use?
The OLED runs on SPI, I2C or an 8-bit parallel bus and the capacitive touch controller uses I2C. Both parts can share one I2C bus when the addresses are set apart.
Can the 0.96 inch capacitive touch panel be made to our drawing?
Yes. Cover glass outline and thickness, FPC length, connector position and the touch IC address can all be built to your drawing for production volumes.
