Our 0.83 range currently covers 2 part numbers at 96x39, driven by SSD1306 over SPI and I2C, in white or blue monochrome. It is a 23.80 x 16.20 mm footprint with a 19.37 x 7.86 mm active area, in white or blue.
Part numbers in this group
Mechanical details
The standard build measures 23.80 x 16.20 x 1.30 mm with an active area of 19.37 x 7.86 mm, which are the numbers you need for the bezel cut-out.
Interface and driver
These modules run on the SSD1306, and the interface options are SPI and I2C. On the I2C builds only four pins are needed (VCC, GND, SCL, SDA), which is why this group is common in Arduino, ESP32 and STM32 projects as well as in production hardware. The parallel and SPI builds suit hosts that need a faster refresh for animation or waveform drawing.
Where this size fits
Typical uses are earbud charging cases, miniature sensors, key fobs and compact status readouts. See also the 0.71 inch page if space is tighter; the 0.91 inch page if you need more viewing area.
What resolution does the 0.83 group come in?
The standard build is 96x39. Portrait and alternative formats are listed in the table above.
Can I run these from an Arduino or ESP32?
Yes. Choose an I2C part number and the wiring is four pins; libraries for the SSD1306, SH1106, SH1107 and SSD1322 families are widely available. SPI builds give a faster refresh but need two more pins.
Is a wide temperature version available?
Selected part numbers in this group are built for -40 °C to +80 °C operation. Tell us the ambient range your product has to survive and we will confirm which builds are qualified for it.
What can be customised?
On this size we regularly adjust the FPC length and pinout, the connector type, the cover glass and the adapter PCB. Changes to the glass itself need tooling, so they only make sense at volume - we will say so honestly rather than quote an unrealistic MOQ.
Custom builds and samples
As a China based display company and module supplier, we hold stock of the standard part numbers on this page and ship samples in one to two weeks. Send your size, resolution, interface and temperature requirements and we will confirm feasibility with a drawing within one working day.
