240x128 display graphic lcd module MCU interface — 240 x 128 dot graphic LCD modules in COB construction with a white LED backlight, available with a T6963C or an RA8835 controller so the module can be matched to the bus and feature set of your existing firmware.
Specifications
| Model | MLG240128Y-1B (T6963C), MLG240128Y-2B (RA8835) |
|---|
| Resolution | 240 x 128 dots |
|---|
| Build | COB (chip on board) |
|---|
| Driver IC | T6963C (MLG240128Y-1B) or RA8835 (MLG240128Y-2B) |
|---|
| Interface | 8-bit parallel MCU |
|---|
| Backlight | White LED |
|---|
Compare with nearby graphic LCD sizes
FAQ
Should I choose the T6963C or the RA8835 version?
The T6963C is the simpler part with a built-in character generator and a single text and graphic area. The RA8835 adds hardware features such as multiple display layers and hardware cursor control, which suits screens that scroll or overlay windows.
How much memory does the 240x128 frame buffer take?
240 x 128 dots at 1 bit per dot is 3840 bytes. Neither build needs the MCU to hold it, because both controllers keep the display RAM on the module.
Is the 240x128 driven over an MCU interface?
Yes, both builds use an 8-bit parallel MCU interface, which most industrial microcontrollers can drive directly without glue logic.
Can you help us migrate from an older 240x128 display?
Yes. Send the datasheet of the module you are replacing and we will compare the outline, pinout, controller and timing before you commit.
