IPS tft LCD module | Maclight Display

IPS lcd is the tft display with supper wide viewing angle, instead of traditional TN tft display have the limited viewing angle, The viewing angle of IPS lcd module could be 178 degree in typical, customer could watch the image in all direction without color inversion and get the high contrast display image. Compare to tn tft, IPS TFT display is more suitable for TFT touch screen, we would introduce Maclight's IPS lcd modules in the following:

0.96" IPS lcd module:

• 0.9 inch ips tft lcd display module
• 80x160 dots tft lcd
• suitable for wearable display
• IPS full viewing angle tft display
• ST7735S controller ic
• 4 wires spi interface.
  

1.54" square IPS lcd module:

• 240x240 dots IPS tft lcd
• suitable for wearable display
• capacitive touch screen optional
• 1.54'' square lcd display,
• IPS tft lcd display panel,
• ST7789 controller ic,
• MCU interface

2.4" IPS LCD screen:

• full viewing angle tft lcd
• high contrast tft display
• touch panel screen optional
• 240RGBx320 resolution 2.4' tft.

2.6" IPS LCD TFT:

• 240RGBX320 dots ips tft
• Full viewing angle
• ILI9341 IC drive
• MCU/SPI/RGB interface

2.8" IPS LCD TFT:

• 240RGBX320 dots ips tft
• full viewing angle tft lcd
• touch panel screen optional tft display
• ST7789V controller ic,
• MCU/SPI/RGB interface

3.5" IPS LCD module-Landscape type:

• QVGA 320RGBX240 dots tft lcd
• Free viewing angle tft display
• Sunlight readable tft, 800 nits high brightness optional
• ST7272 driver,
• RGB interface,
• resistive and capacitive touch screen optional.

3.5" IPS LCD module-Portrait type:

• 320RGBx480 dots
• SPI/RGB/MCU interface
• ILI9486L driver ic

4.3" ips lcd module:

• 800RGBx480 dots
• wide temperature
• Free viewing angle
• HX8264-E & HX8664-B driver ic,
• RGB interface

5.0" ips lcd module:

• Wide temperature tft , -30~80 degree working temperature
• Full viewing angle
  
• 800x480 pixel
  
• Capacitive touch screen and resistive touch optional
  
• Sunlight readable tft with high brightness backlight optional

7" lcd ips 1024x600:

• IPS tft lcd
• full viewing angle tft display
• 1024 RGB x600 dots tft lcd
• Touch panel optional
• High brightness backlight optional

10.1" IPS LCD module:

• 1280 RGB x800 dots tft lcd
• LVDS interface
• Capacitive touch screen optional
• Sunlight readable high brightness backlight optional

Why choose IPS LCD Module?

1. Wider viewing angles – crystals are aligned horizontally rather than vertically, so it allows for better angled viewing, perfect for smaller screens, where you need to rotate the screen for better viewing
2. Lower power consumption, resulting in longer battery life – again for smaller screens, this works great, because even though this technology requires more power, a smaller screen has less power drain.
3. Brilliant color image – this is a huge advance in technology, from a Twisted Nematic (TN) display that only produced 6-bit color, to an 8-bit color display with the IPS technology
4. Variations to help with user’s viewing requirements or desires – there are several different forms of IPS technology: Super-IPS, (S-IPS) Advanced Super IPS, Advanced S-IPS, where the liquid crystal molecules stay parallel to the front and back panels, instead of perpendicular when a voltage is applied
5. Consistent, accurate color, under different viewing angles
6. Clear images and stable response time, which allows for faster response time – good for videos.

Viewing angle of IPS LCD vs TFT:

Viewing directions	IPS viewing angle	TFT viewing angle
6 o’clock	85°	65°
12 o’clock	85°	55°
3 o’clock	85°	65°
9 o’clock	85°	65°

What is IPS LCD:

PS (In-Plane Switching) lcd is still a type of TFT LCD, different to regular tft in TN (Twisted Nematic) mode, the IPS LCD liquid crystal elements inside the tft lcd cell, they are arrayed in plane inside the lcd cell when power off, so the light can not transmit it via the IPS lcdwhen power off, When power on, the liquid crystal elements inside the IPS tft would switch in a small angle, then the light would go through the IPS lcd display, then the display on since light go through the IPS display,  the switching angle is related to the input power, the switch angle is related to the input power value of IPS LCD, the more switch angle, the more light would transmit the IPS LCD, we call it negative display mode.

Inquiry us Now at : [email protected] for IPS LCD module information.