This is a smallest 16X2 lcd, with small 16 characters x 2 lines, stn lcd, yellow-green/blue modue/gray/black-white mode available, its viewing area is 36x10mm, that can be used for the devices with small lcd screen. its characters as small as 2.15x4.25mm, lcd driving with 1/16 duty, 1/5 bias. White LED backlight, input voltage can be 3.3V or 5V.
yellow-green mode: 16x2 black characters, yellow-green background
Blue modue: white characters, blue background
this lcd module display use SPLC780D or equivalent controller, characters,competitive price,standard sizes.
|
Character
|
16*2
|
|
Part No.
|
MLC162Y-8
|
|
Size:L*W*H
|
53*20*8.1
|
|
Viewing area:L*W
|
36.0*10.0
|
|
Dots size:L*W
|
0.33*0.35
|
|
Dots Pitch:
|
0.36*0.40
|
|
Interface
|
Parallel
|
For 16X2lcd module display, please contact us at: [email protected]
Where this 16x2 fits
At 36.0 x 10.0 mm this is the smallest viewing area in our 16x2 range — roughly a sixth of the largest — with 2.15 x 4.25 mm characters. It is the one to pick when the window is the constraint: handheld meters, portable testers and anything else where the enclosure simply has no room for a standard 1602 cut-out.
| Part number | Viewing area (mm) | Outline (mm) | |
|---|
| MLC162Y-8 | 36.0 x 10.0 | 53.0 x 20.0 x 8.1 | This module |
| MLC162Y-2 | 64.5 x 16.0 | 85.0 x 36.0 x 13.0 | Nearly 3x the window area, full 16 mm height |
| MLC162Y-1 | 64.5 x 16.0 | 80.0 x 36.0 x 8.7 | Standard 1602 window |
| MLC162Y-3 | 99.0 x 24.0 | 122.0 x 44.0 x 13.5 | Largest, 4.84 x 8.06 mm characters |
All four share the same 16-pin single-enable pinout and command set, so the firmware does not change when the size does. Because a module this small usually ends up in a tight housing, the pin order and the side the connector leaves from are the two things most often customised here — see the Character LCD Pinout Guide.
